Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
MAINTENANCE Lubrication 457
Confidential
[Lubrication 9] [Lubrication 10]
Part Name CR Guide Shaft
Lubrication Point
On the contact point of the CR Guide Shaft (home side) with the CR
Unit
Lubricants G-84
Amount φ 2 x 3 mm x 4 points (Main shaft: x 2, Secondary shaft: x 2)
Note
Apply the grease to the points (two points on each shaft), and spread it
evenly around the shaft (in red).
Lubrication Point
Lubrication Point
Cross-section
Shaft
Part Name CR Guide Shaft
Lubrication Point On the contact point of the CR Guide Shaft (full side) with the CR Unit
Lubricants G-84
Amount φ 2 x 3 mm x 4 points (Main shaft: x 2, Secondary shaft: x 2)
Note
Apply the grease to the points (two points on each shaft), and spread it
evenly around the shaft (in red).
Lubrication Point
Lubrication Point
Shaft
Cross-section
To Next Page
Loading...
