Chapter 3 Application Development Information
81
3
*1: Fixed value
*2: Only for standard mode
Enable/disable transmission of paper
status
✔✔✔✔
Execute test print ✔✔✔✔
Select the print speed ✔
Select the number of parts for the
thermal head energizing
✔
Initialize maintenance counter ✔✔✔✔
Transmit maintenance counter ✔✔✔✔
Receipt enhancement commands
Cancel set values for top/bottom logo
printing
✔
Transmit set values for top/bottom logo
printing
✔
Set top logo printing ✔
Set bottom logo printing ✔
Make extended settings for top/
bottom logo printing
✔
Enable/disable top/bottom logo
printing
✔
MICR control commands (only for models with the MICR reader)
Transmit real-time status ✔✔✔✔
Select MICR data handling ✔✔✔✔
Read check paper ✔✔✔✔
Load check paper to print starting
position
✔✔✔✔
Eject check paper ✔✔✔✔
Request retransmission of check paper
reading result
✔✔✔✔
Clean MICR mechanism ✔✔✔✔
To Next Page
Loading...
