Epson TM-H6000IV

80
Transmit the transmission conditions for
the serial interface
✔✔✔✔
Save the setting values from the work
area into the storage area
✔✔✔✔
Load the setting values stored in the
storage area to the work area
✔✔✔✔
Select the setting values loaded to the
work area after the initialization process
✔✔✔✔
Delete the specified record ✔✔✔✔
Store the data in the specified record ✔✔✔✔
Transmit the data in the specified
record
✔✔✔✔
Transmit capacity of the NV user
memory currently being used
✔✔✔✔
Transmit the remaining capacity of the
NV user memory
✔✔✔✔
Transmit the key code list ✔✔✔✔
Delete all data in the NV user memory ✔✔✔✔
Set 40 cpl mode ✔✔✔✔
Miscellaneous commands
Initialize printer ✔✔✔✔
Transmit printer ID ✔✔✔✔
Set horizontal and vertical motion units ✔✔✔
✔*
1
Select peripheral device ✔✔✔✔
Generate pulse ✔✔✔✔
Generate pulse in real time ✔✔✔✔
Execute power-off sequence ✔✔✔✔
Clear buffer(s) ✔✔✔✔
Enable/disable real-time command ✔✔✔✔
Send real-time request to printer ✔✔✔✔
Select page mode ✔✔
Select double-density page mode ✔
Select standard mode ✔✔