Epson TM-H6000IV - Page 79

Chapter 3 Application Development Information
79
3
Composite Symbology: Set the width of
module
✔
Composite Symbology: Set the
maximum width of GS1 DataBar
Expanded Stacked
✔
Composite Symbology: Select font for
HRI characters
✔
Composite Symbology: Store the data
in the symbol storage area
✔
Composite Symbology: Print the symbol
data in the symbol storage area
✔
Composite Symbology: Transmit the
size information of the symbol data in
the symbol storage area
✔
Macro function commands
Start/end macro definition ✔✔✔✔
Execute macro ✔✔✔✔
Mechanism control commands
Turn unidirectional print mode on/off ✔✔✔✔
Return home ✔✔✔
Set/cancel cut sheet reverse eject ✔✔✔✔
Release paper ✔✔✔✔
Select cut mode and cut paper ✔
Customized commands
Change into the user setting mode ✔✔✔✔
End the user setting mode session ✔✔✔✔
Change the setting of the memory
switch
✔✔✔✔
Transmit the setting of the memory
switch
✔✔✔✔
Set the customized setting values ✔✔✔✔
Transmit the customized setting values ✔✔✔✔
Set the transmission conditions for the
serial interface
✔✔✔✔