Epson TM-H6000V - Page 128

128
Appendix
 1: Factory installed options.
 2: The available interfaces vary by the printer model.
 3: Only picket fence bar codes are supported if using a slip printer.
 4: Cannot be printed by using the slip printer.
 5: This is the average power under our operation conditions. It varies depending on the conditions of use and the model.
Two-dimensional symbol/
Composite symbol printing
*4
PDF417, QR code, MaxiCode, Data Matrix, Aztec Code,
GS1 DataBar, Composite Symbology
Inked ribbon Slip ERC-32
Endorsement
*1
ERC-43
Supplied voltage DC 24 V ± 7%
Current consumption Mean: Approximately. 1.8 A
AC power consumption
*5
(100 V to 230 V, 50 to 60 Hz)
Operating: Approximately. 33.8 W
Standby: Approximately. 0.82 W
Life Mechanism 20 million lines
Thermal head 200 km (when using the specified original paper types (PD160R, TF50KS-EY,
or KT55FA))
Autocutter 3 million cuts (when using the specified original paper types (PD160R,
TF50KS-EY, or KT55FA), at normal temperature and normal humidity)
MTBF 360,000 hours
MCBF 70 million lines
Temperature/humidity Operating: 5 to 45°C {41 to 113°F}
Storage: -10 to 50°C {14 to 122°F}
Humidity Operating: 10 to 90% RH
Storage: 10 to 90% RH, except for paper
Air pressure (Altitude) 726 hPa (Approximately. 3000 m {3280.84 yards} above sea level) or less
Overall dimensions 181 × 186 × 278 mm {7.13 × 7.32 × 10.94"} (H × W × D)
Mass Approximately. 4.4 kg {9.7 lb} (paper excluded)