Epson TM-H6000V - Receipt Enhancement Information Print Mode

74
Chapter 3 Advanced Usage
3
Receipt Enhancement Information Print Mode
You can check the following items using the R/E information mode:
 Automatic top logo setting
 Automatic bottom logo setting
 Extended settings for automatic top/bottom logo
Follow the steps below.
1
After running a self-test, hold down the Feed button for at least one second, and then
select the Mode selection.
The Mode selection guidance is printed, and the Power LED flashes.
2
After briefly (less than one second) pressing the Feed button twice, hold it down for
at least one second, to print the R/E information.
After information printing, the Mode selection guidance is printed again.
3
To finish, turn off the power, or select "Exit and Reboot Printer".