Epson TM-H6000V

129
Appendix
Printing Specifications
Slip printing
lps: lines per second
cpi: characters per inch
 when the head energizing time is set to normal mode.
Printing method Serial impact dot matrix
Head wire configuration 9-pin vertical line, wire pitch approximately 0.353 mm {1/72"}
Printing direction Bidirectional, minimum distance printing
Printing speed
*
Front Approximately. 5.7 lps
(printing 40 columns per line with 17.8 cpi)
Endorsement Approximately. 4.0 lps
(printing 40 columns per line with 21.2 cpi)
Characters per line Front Font A (initial setting): 45
Font B: 60
Endorsement Font A: 25
Font B: 33
Endorsement font (initial setting): 40
Character dot spacing Front Font A (initial setting): 1 dot
Font B: 2 half dots
Endorsement Font A: 1 dot
Font B: 2 half dots
Printing speed may be slower, depending on such items as the data transmission speed.