91
Chapter 5 Handling
5
Handling
This chapter describes basic handling of the printer.
Installing and Replacing Roll Paper
Follow the steps below to install/replace the roll paper.
1
Make sure the printer is turned on.
2
Open the roll paper cover.
3
Remove the used roll paper core, if there is one, and insert the roll paper in the cor-
rect direction.
CAUTION
Be sure to use the specified paper. ("Receipt printing" on page 130)
Do not insert any paper that has clips or staples. This may cause paper jams and damage.
Make sure the slip/validation paper is flat, without curls, folds, or wrinkles.
To Next Page
Loading...
