Epson TM-H6000V

56
Chapter 3 Advanced Usage
3
When a Serial Interface is Connected
DIP Switch Bank 1
Transmission Speed (DIP Switches 1-7/1-8)
bps: bits per second
 The setting value of the communication conditions of the serial interface set in the software settings is reflected.
The setting value can be specified as 2400, 4800, 9600, 19200, 38400, 57600, and 115200.
SW Function ON OFF
Default
setting
1-1 Data reception error Ignored Prints “?” OFF
1-2 Receive buffer capacity 45 bytes 4 KB OFF
1-3 Handshaking XON/XOFF DTR/DSR OFF
1-4 Word length 7 bits 8 bits OFF
1-5 Parity check Yes No OFF
1-6 Parity selection Even Odd OFF
1-7
Baud rate selections
See the
" Transmission Speed (DIP Switches 1-7/1-8)"
table below.
ON
1-8 OFF
Transmission speed (bps: bits per second) SW 1-7 SW 1-8
4800 ON ON
9600 OFF ON
19200 (default setting) ON OFF
38400 * OFF OFF