32
Chapter 2 Setup
2
Connecting the Printer to the Host
USB Interface
When using the USB interface, fix the USB cable with the locking wire saddle to prevent the USB cable from
coming off.
Ethernet Interface
Use ethernet cable to connect the printer to network via a hub.
Use Epson TM-H6000V Utility for Windows or EpsonNet Config to set network.
For details on Epson TM-H6000V Utility for Windows, refer to TM-H6000V Utility User's Manual.
Be sure to install the driver before connecting the printer to the host computer.
The printer uses modular connectors specifically designed for the cash drawer. Do not connect
these connectors to an ordinary telephone line.
Do not place any weight or stress on the cable when using. Doing so could damage the cable and
connectors.
When LAN cables are installed outdoors, make sure they are connected through devices that have
surge protection.
Otherwise, the devices can be damaged by lightning.
Never attempt to connect the drawer kick cable or a standard telephone line cable to the LAN
connector.
Do not insert the Ethernet cable into the DM-D connector.
As same with Conventional models, you can use EpsonNet Config (Web version) in the same way.
User name/password: epson
To Next Page
Loading...
