16
Control Panel
Name Status Description
POWER LED On Power is being supplied.
Off Power is not being supplied.
ERROR LED Off Normal operation (online)
On Immediately after the power is turned on or immediately after a reset
(offline).
Automatically goes off after a while to indicate that the printer is ready.
The end of the roll paper is detected, and when printing has stopped
(offline). If this happens, replace the roll paper.
Flashing An error has occurred (U
"Error Status" on page 22)
PAPER OUT LED Off There is a sufficient amount of roll paper remaining.
On There is little or no roll paper remaining.
Flashing A self-test printing standby state and macro execution standby state
FEED button Pressing this button once feeds the roll paper by one line. Holding this button down
feeds the roll paper continuously.
POWER LED
ERROR LED
PAPER OUT L E D
FEED button
To Next Page
Loading...
