Epson TM-U220-i

59
Chapter 2 Setup
2
Setting the DIP Switches
Various functions can be changed with the DIP switch settings.
When you adjust the items, we recommend to confirm the new setting. The confirmation is
performed by running a self-test. (U
"Self-test Mode" on page 123).
Functions
DSW1 (DIP Switch 1)
*: Be sure to use the device with DIP switches 1-8 ON.
: default values
SW Function On Off
1 Printing mode Right side up printing mode Normal printing mode
2 Receive buffer capacity 40 bytes
4 KB
3 Reserved -
Fixed to Off
4 Reserved -
Fixed to Off
5 Reserved -
Fixed to Off
6 Reserved -
Fixed to Off
7 Reserved -
Fixed to Off
8 BUSY condition *
Receive buffer full Receive buffer full or Offline