Epson TM-U220-i Technical Reference Guide

101
Chapter 3 Application Development Information
3
Web Service Settings - Device Admin - Printer
You can set printers or check their operation.
 This product cannot be deleted from a device.
 The "device ID" for this product can be changed. (U "Changing Device ID of This Product"
on page 74
)
Item Description
Printer to be
registered
Device ID Sets the ID of a printer to register.
Model Selects the model of a printer to register.
IP Address Sets the IP address of a printer to register.
Retry Interval (ms) Sets the retry interval of a printer to register.
Add Adds a printer to the Device List.
Registered printers Displays a list of registered printers.
Test Print Performs a test printing.
When SSL is enabled on this product, make sure that the certificate
issued by the signature source certification authority of the SSL
certificate imported to this product is registered in the computer or
device.
Delete Deletes a registered printer.

Epson TM-U220-i Specifications

General

Type	POS printer
Color	Yes
Print technology	Dot matrix
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Maximum roll diameter	83 mm
Standard interfaces	Ethernet, Parallel, RS-232, RS-485, USB, Wireless LAN
Serial interface type	RS-232, RS-485
Connectivity technology	Wired & Wireless
Electromagnetic compatibility	VCCI class A, FCC class A, CE marking, AS/NZS 3548 class B
Mean cycles between failures (MCBF)	18000000
Safety	UL, CSA, TÜV (EN60950)
Mean time between failures (MTBF)	180000 h
Product color	Gray

Weight and Dimensions

Depth	248 mm
Width	160 mm
Height	138.5 mm