Epson TM-U220-i

63
Chapter 2 Setup
2
Customize value
 Msw 8-5:
When Off is selected, a bit of the "roll paper end sensor" in each status that is transmitted
from the printer is changed every time the roll paper cover is open or closed. When On is
selected, a bit of the "roll paper cover open / close" in each status that is transmitted from
the printer is changed every time the roll paper cover is open or closed.
 Msw 8-8:
When Off is selected, a bit of the "automatic recoverable error" in each status that is
transmitted from the printer is changed every time the roll paper cover is open. When On is
selected, a bit of the "mechanical error" in each status that is transmitted from the printer is
changed every time the roll paper cover is open.
 The setting of Msw 8-5 and 8-8 can be set by “Memory switch setup mode”. (U
"Memory
Switch Setup Mode" on page 64
).
Function Selectable value
Roll paper width
57.5 mm 69.5 mm
76 mm (default value) --
See " Changing the Paper Width" also to adjust roll paper width (U
"Changing the Paper
Width" on page 43
).