93
Chapter 3 Application Development Information
3
•(1): [JobID, Print result = true] is returned to the application.
•(2): [JobID, Print result = false, Error code = Printer status] is returned to the application.
•(3): The remaining free space in the spooler and the size of the print data is checked, and the
product determines whether or not the print data can be spooled.
•(4): If the print data cannot be spooled, the print data is cleared. [JobID, Print result = false, Error
code = EX_SPOOLER (spooler stopped)] is returned to the application.
This data is not stored in the product's spooler or the log storage area.
• (5): When print data can be spooled, [JobID, Print result = true] is stored in
the spooler. [JobID,
Print result = true] is also returned to the application.
•(6): Make the reprint settings (number of times and interval) in EPSON TMNet WebConfig.
(U
"Web Service Settings - Spooler - Settings" on page 104)
• (7): When printing is su ccessful, the spooler's print data and [JobID, Print result = true] are
deleted. [JobID, Print result = true] are stored in the log storage area of this product.
•(8): Make the print forwarding location settings in EPSON TMNet WebConfig.
(U
"Web Service Settings - Spooler - Print forwarding" on page 105).
•(9): When printing fails, the spooler's print data and [JobID, Print result = true] are deleted. [JobID,
Print result = false, Error code = Printer status] are stored in the log storage area of this
product.
•(10): Make the forwarding message settings in EPSON TMNet WebConfig.
(U
"Web Service Settings - Spooler - Print forwarding" on page 105)
When this product is turned off, data in the spooler and the log storage area is cleared.
When printing cannot be performed with this products spooler or print forwarding, the print
data is cleared. If printing has not been completed when checking in the application, we rec-
ommend reprinting.
Print data that is too large for the remaining free space in the spooler is cleared. For the
spooler capacity, see
"Software Specifications" on page 139.
If the number of job IDs exceeds the maximum number of JobID, the IDs are overwritten
starting with the oldest first. For the maximum number of JobID, see
"Software Specifica-
tions" on page 139
.
You cannot check the print results such as the spooler print data or job IDs from EpsonNet
WebConfig.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
