Epson WF-3820 Series User Manual

Uneven Colors, Smears, Dots, or Straight Lines Appear in the Copied Image
e following causes can be considered.
The paper path is dirty.
Solutions
Load and eject paper without printing to clean the paper path.
& “Cleaning the Paper Path for Ink Smears” on page 130
There is dust or dirt on the originals or the scanner glass.
Solutions
Remove any dust or dirt that adheres to the originals, and clean the scanner glass.
& “Cleaning the Scanner Glass” on page 130
There is dust or dirt on the ADF or originals.
Solutions
Clean the ADF, and remove any dust or dirt that adheres to the originals.
& “Cleaning the ADF” on page 131
The original was pressed with too much force.
Solutions
If you press with too much force, blurring, smudges, and spots may occur.
Do not press with too much force on the original or the document cover.
& “Placing Originals” on page 33
The copy density setting is too high.
Solutions
Lower the copy density setting.
& “Basic Menu Options for Copying” on page 85
Solving Problems > Printing, Copying, Scanning, and Faxing Quality is Poor > Copy Quality is Poor
221

Epson WF-3820 Series Specifications

General

Print Technology	Inkjet
Max Print Resolution	4800 x 2400 dpi
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Paper Capacity	250 sheets
Duplex Printing	Yes
Scanner Type	Flatbed color image scanner
Display	2.7" color touchscreen
Functions	Print, Copy, Scan, Fax
ADF Capacity	35 sheets
Scan Resolution	1200 x 2400 dpi
Fax Speed	33.6 Kbps
Ink Type	DURABrite Ultra pigment ink
Ink Cartridges	4 individual ink cartridges (Black, Cyan, Magenta, Yellow)
Paper Sizes Supported	A4, A6
Mobile Printing	Epson Connect, Apple AirPrint, Mopria
Dimensions (W x D x H)	16.7" x 19.8" x 10.8"