Epson WF-3820 Series User Manual

Moiré (Cross-Hatch) Patterns Appear in the Copied Image
If the original is a printed document such as a magazine or a catalog, a dotted moiré pattern
appears.
Solutions
Change the reduce and enlarge setting. If a moiré pattern still appears, place the original at a slightly
dierent
angle.
& “Basic Menu Options for Copying” on page 85
An Image of the Reverse Side of the Original Appears in the Copied Image
e following causes can be considered.
When scanning thin originals, images on the back may be scanned at the same time.
Solutions
Place the original on the scanner glass and then place a piece of black paper over it.
& “Placing Originals” on page 33
The copy density setting is too high.
Solutions
Lower the copy density setting.
& “Basic Menu Options for Copying” on page 85
Solving Problems > Printing, Copying, Scanning, and Faxing Quality is Poor > Copy Quality is Poor
222

Epson WF-3820 Series Specifications

General

Print Technology	Inkjet
Max Print Resolution	4800 x 2400 dpi
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Paper Capacity	250 sheets
Duplex Printing	Yes
Scanner Type	Flatbed color image scanner
Display	2.7" color touchscreen
Functions	Print, Copy, Scan, Fax
ADF Capacity	35 sheets
Scan Resolution	1200 x 2400 dpi
Fax Speed	33.6 Kbps
Ink Type	DURABrite Ultra pigment ink
Ink Cartridges	4 individual ink cartridges (Black, Cyan, Magenta, Yellow)
Paper Sizes Supported	A4, A6
Mobile Printing	Epson Connect, Apple AirPrint, Mopria
Dimensions (W x D x H)	16.7" x 19.8" x 10.8"