c
Important:
Using a dry cloth may damage the surface of the roller. Use the ADF
aer
the roller has dried.
3.
Close the ADF cover, and then open the document cover.
4.
Clean the part that is shown in the illustration.
c
Important:
❏ If the glass surface is stained with grease or some other hard-to-remove material, use a small amount of
glass cleaner and a so cloth to remove it. Wipe o all remaining liquid.
❏ Do not press the glass surface too hard.
❏ Be careful not to scratch or damage the surface of the glass. A damaged glass surface can decrease the scan
quality.
Maintaining the Printer
>
Cleaning the ADF
164
To Next Page
Loading...
