Epson WorkForce WF-2840 Series User Manual

accordance with its specications. e Epson warranty does not cover the cost of this replacement. It is a user-
serviceable part.
Note:
❏ When the maintenance box is full, you cannot print and clean the print head until it is replaced to avoid ink leakage.
However, you can perform operations that do not use ink such as scanning.
❏ When the following screen is displayed, the part cannot be replaced by users. Contact Epson support.
Temporarily Printing with Black Ink
When color ink is expended and black ink still remains, you can use the following settings to continue printing for
a short time using only black ink.
❏ Type of paper: plain papers, Envelope
❏ Color: B&W or Grayscale
❏ Borderless: Not selected
❏ EPSON Status Monitor 3: Enabled (When printing from the printer driver on Windows.)
Because this feature is only available for approximately
ve
days, replace the expended ink cartridge as soon as
possible.
Note:
❏ If EPSON Status Monitor 3 is disabled, access the printer driver, click Extended Settings on the Maintenance tab, and
then select Enable EPSON Status Monitor 3.
❏ e available period varies depending on the usage conditions.
Replacing Ink Cartridges and Other Consumables > Temporarily Printing with Black Ink
155

Epson WorkForce WF-2840 Series Specifications

General

Print Technology	Inkjet
Max Print Resolution	5760 x 1440 dpi
Connectivity	USB, Wi-Fi, Wi-Fi Direct
Automatic Document Feeder	Yes
Input Tray Capacity	100 sheets
Functions	Print, Copy, Scan, Fax
Scan Resolution	1200 x 2400 dpi
Paper Capacity	100 sheets
Mobile Printing	Apple AirPrint
Scanner Type	Flatbed
Fax Speed	33.6 Kbps
Paper Sizes	A4, A5, A6, Letter, Legal
Ink Cartridges	4 individual cartridges (Black, Cyan, Magenta, Yellow)
Print Speed (Black)	10 ppm
Print Speed (Color)	5 ppm