Epson WorkForce WF-2840 Series - Scanning Using WSD

6.
Make sure that the Custom Action is selected on the Custom Action list.
7.
Click Close to close Epson Event Manager.
Scanning Using WSD
Note:
❏ is feature is only available for computers running Windows 10/Windows 8.1/Windows 8/Windows 7/Windows Vista.
❏ If you are using Windows 7/Windows Vista, you need to setup your computer in advance using this feature.
1.
Place the originals.
2.
Select Scan on the home screen.
To select an item, use the
u d l r buttons, and then press the OK button.
Scanning > Scanning Using the Control Panel > Scanning Using WSD
119