Epson WorkForce WF-2840 Series User Manual

Connecting the Printer to a Phone Line
Connect the printer to a telephone wall jack using an RJ-11 (6P2C) phone cable. When connecting a telephone to
the printer, use a second RJ-11 (6P2C) phone cable.
Depending on the area, a phone cable may be included with the printer. If it is included, use that cable.
You may need to connect the phone cable to an adapter provided for your country or region.
Note:
Remove the cap from the EXT. port of the printer only when connecting your telephone to the printer. Do not remove the cap
if you are not connecting your telephone.
In areas where lightning strikes occur frequently, we recommend that you use a surge protector.
Connecting to a Standard Phone Line (PSTN) or PBX
Connect a phone cable from the telephone wall jack or PBX port to the LINE port on the back of the printer.
Connecting to DSL or ISDN
Connect a phone cable from the DSL modem or the ISDN terminal adapter to the LINE port on the back of the
printer. See the documentation provided with the modem or the adapter for more details.
Note:
If your DSL modem is not equipped with a built-in DSL lter, connect a separate DSL lter.
Fax Settings > Connecting the Printer to a Phone Line > Connecting the Printer to a Phone Line
68

Epson WorkForce WF-2840 Series Specifications

General

Print Technology	Inkjet
Max Print Resolution	5760 x 1440 dpi
Connectivity	USB, Wi-Fi, Wi-Fi Direct
Automatic Document Feeder	Yes
Input Tray Capacity	100 sheets
Functions	Print, Copy, Scan, Fax
Scan Resolution	1200 x 2400 dpi
Paper Capacity	100 sheets
Mobile Printing	Apple AirPrint
Scanner Type	Flatbed
Fax Speed	33.6 Kbps
Paper Sizes	A4, A5, A6, Letter, Legal
Ink Cartridges	4 individual cartridges (Black, Cyan, Magenta, Yellow)
Print Speed (Black)	10 ppm
Print Speed (Color)	5 ppm