EasyManua.ls Logo

Epson WorkForce WF-2840 Series - Loading Envelopes and Precautions

Epson WorkForce WF-2840 Series
236 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Note:
Return the remaining paper to its package. If you leave it in the printer, the paper may curl or the print quality may
decline.
Related Information
& “Paper Handling Precautions” on page 47
& “Available Paper and Capacities” on page 45
& “Loading Envelopes and Precautions” on page 50
& “Loading Long Papers” on page 51
Loading Envelopes and Precautions
Loading envelopes short edge
rst
at the center with the
ap
facing down, and slide the edge guides to the edges of
the envelopes.
Fan and align the edges of the envelopes before loading. When the stacked envelopes are pued up with air,
press them down to atten them before loading.
Do not use envelopes that are curled or folded. Using these envelopes causes paper jams and smears on the
printout.
Do not use envelopes with adhesive surfaces on the
aps
or window envelopes.
Avoid using envelopes that are too thin, as they may curl during printing.
Related Information
& “Available Paper and Capacities” on page 45
& “Loading Paper in the Rear Paper Feed” on page 48
Preparing the Printer
>
Loading Papers
>
Loading Envelopes and Precautions
50

Table of Contents

Related product manuals