Epson WorkForce WF-2840 Series User Manual

❏ Pre-punched paper
Note:
❏ Load a single sheet of dened size plain paper with binding holes at the le or right.
❏ Adjust the print position of your le to avoid printing over the holes.
❏ Automatic 2-sided printing is not available for pre-punched paper.
4.
Slide the edge guides to the edges of the paper.
5.
On the control panel, set the size and type of the paper you loaded in the rear paper feed.
To select an item, use the
u d l r buttons, and then press the OK button.
Note:
❏ You can also display the paper size and paper type settings screen by selecting Settings > Printer Setup > Paper
Source Settings > Paper Setting.
❏ For letterhead paper, select Letterhead as the paper type.
❏ For letterhead paper, if you print on paper that is smaller than the setting in the printer driver, the printer may print
beyond the edges of the paper which can lead to ink smears on your printouts and excess ink building up inside the
printer. Make sure you select the correct paper size setting.
❏ 2-sided printing and borderless printing are not available for letterhead paper. Also, the print speed may be slower.
6.
Slide out the output tray.
Preparing the Printer > Loading Papers > Loading Paper in the Rear Paper Feed
49

Epson WorkForce WF-2840 Series Specifications

General

Print Technology	Inkjet
Max Print Resolution	5760 x 1440 dpi
Connectivity	USB, Wi-Fi, Wi-Fi Direct
Automatic Document Feeder	Yes
Input Tray Capacity	100 sheets
Functions	Print, Copy, Scan, Fax
Scan Resolution	1200 x 2400 dpi
Paper Capacity	100 sheets
Mobile Printing	Apple AirPrint
Scanner Type	Flatbed
Fax Speed	33.6 Kbps
Paper Sizes	A4, A5, A6, Letter, Legal
Ink Cartridges	4 individual cartridges (Black, Cyan, Magenta, Yellow)
Print Speed (Black)	10 ppm
Print Speed (Color)	5 ppm