43 / 80
6 • Working with ERBECRYO 2
80113-401_V24023
2023-05
Fig. 6-7
In the Timer segment (4) in the main screen you will see the Count Up & Beep icon.
Count Down & Beep
You select a Count Down interval. If you press the footswitch, you activate Freeze
mode. The Count Down begins. Once the Count Down has been completed, an acoustic
signal sounds.
If you continue to press the footswitch after the Count Down has been completed,
Freeze mode is active again.
If you release the footswitch and interrupt the current Count Down, you will see the
remaining Count Down interval on the display. The next time it is activated, the Count
Down begins from the start.
1. Press the selection button next to the Timer displayto call up the Timer menu.
2. Select Count Down & Beep with the selection buttons next to the up/down
arrows.
3. Press the selection button next to OK on the display.
4. Select a Count Down interval of 1 - 100 seconds with the selection buttons next
to the up/down arrows.
5. Press the selection button next to OK on the display.
Fig. 6-8
In the Timer segment (4) in the main screen you will see the Count Down & Beep icon.
Example Count Down interval: 10 seconds.
To Next Page
Loading...
