2.9. Dangers due to electrical voltage
The wheelchair is powered by electricity. Contact with live components or the batteries can result in
dangerous injuries, burns or death. To avoid this, please note the following:
• Work on the electrical equipment of the wheelchair may only be carried out by a qualified electri-
cian or by persons who have read the operating instructions under the supervision of a
qualified electrician in accordance with the electrotechnical regulations.
• Use only fully functional and tested tools to carry out work on the electrical installation.
• Before working on the electrical system of the wheelchair, the power supply must be interrupted.
2.10. Safety facilities
The following facilities are part of the safety concept of the equipment. Familiarise yourself with the
position and function of the safety facilities before use.
2.10.1. Electromagnetic motor brake
The motor brake is activated when the wheelchair is in Driving mode. It allows controlled braking
while driving and is operated with the joystick.
2.10.2. Electromagnetic parking brakes
The wheelchair parking brakes lock the drive wheels if necessary. In this way, they prevent uninten-
tional movements of the wheelchair when stationary, e. g. on public transport, in vehicles, elevators
or on sloping surfaces.
They are located on the drive wheels and can only be activated when stationary.
2.10.3. Footrest
The footrest prevents the user's feet from coming into contact with the ground while driving.
This prevents injuries and unintentional braking of the wheelchair.
• The footrest must be fully unfolded before using the wheelchair.
• The footrest must not be stepped on when getting in and out.
2.10.4. Lap belt
The lap belt is used to secure the user on the seat of the wheelchair. It prevents the user from
sliding out of the seat during braking. The strap can be adjusted to the user's body shape for optimal
effect.
16
To Next Page
Loading...