Ericsson AVP 1000 - Page 308

Web GUI Control
5-132
EN/LZT 790 0023/1 R16A
5.5.4.1.2 Additional Settings for IP Output Transport Streams
The IP related Transport Stream parameters are available in the Properties widget
on the Service Configuration page if an IP output Transport Stream is selected in
the Outputs widget.
Table 5.116 Additional Settings for IP Output Transport Streams
Parameter Values Description
IP Bit Rate
Specifies the bit rate of the IP output and includes the
overhead added by IP encapsulation. Read only parameter.
TS Packets per IP
Packet
1 to 7
Specifies how many Transport Stream packets to encapsulate
in one IP packet.
IP Encapsulation
UDP, RTP, RTP FEC Column, RTP FEC
Column and Row
Specifies what higher layer to encapsulate in IP packets. UDP
and RTP is self explanatory and means that the Transport
Stream is first encapsulated in UDP or RTP packets, then an
IP header is added. If RTP FEC column or RTP FEC Columns
and Row is selected one (Column) or two (Column and Row)
RTP streams are output in addition to the RTP streams that
carry the Transport Stream.
Number of Rows The number of rows used in FEC encoding.
Number of Columns The number of columns used in FEC encoding.
Alignment Block Aligned, Non Block Aligned
The aligned method used for ProMPEG FEC (SMPTE
2022-1, 2)
IP Configuration/Destination 1
Destination IP
Address
aaa.bbb.ccc.ddd
The destination IP address to use in the IP packet header of
the IP packets that carry the Transport Stream
Destination UDP Port 0 to 65535
The destination UDP port to use in the IP packet header of the
IP packets that carry the Transport Stream
Source IP Address aaa.bbb.ccc.ddd
The source IP address to use in the IP packet header of the IP
packets that carry the Transport Stream
Source MAC Address Read only parameter, not yet supported.
Source UDP Port 0 to 65535
The source UDP port to use in the IP packet header of the IP
packets that carry the Transport Stream
Vlan Header Disabled, Enabled.
Vlan ID Tag
Vlan Tag The VLAN tag to use for the current IP stream.
Vlan Priority 0 to 7
The priority to be used by the switches to prioritize different
services.
Time To Live 0 to 240 TTL value for inclusion in the IP header
Type Of Service 0 to 255 ToS value for inclusion in the IP header
Actual source IP
address, calculated by
a rule
aaa.bbb.ccc.ddd The source IP address. Read only parameter
Actual source MAC
address, calculated by
a rule
The source MAC address. Read only parameter.