Service Settings
The service parameters are available in the Properties widget on the Service
Configuration page if a service is selected in the Outputs widget. The same
settings are also available through the front panel under Output/<IP interface
name>/<Transport Stream name>/Service List/<service name>.
Table 5.117 Service Settings
Parameter Values Description
Service ID 1 - 65535
PMT PID 16 to 8190 The PID assigned to the Program Map Table for the service.
PCR PID 16 to 8190
The PID of the packetized elementary stream that transmits
the PCR for the current service.
BISS Key None, (Hidden) selected Key
The assigned security keys for the for Basic Interoperable
Scrambling System presets.
SDT Parameters
Provider The name of the service provider.
Name The service name as it appears in the PMT.
Service Type
Digital TV, Digital Radio, Teletext, Mosaic,
Data Broadcast
The type of service as transmitted in the PMT.
(T/C) VCT Parameters (ATSC Only)
Short Name String Short description of the service
Long Name String Long description of the service
Major Channel
Number
1 to 99 PSIP major channel number
Minor Channel
Number
1 to 99 PSIP minor channel number
Service Type
Digital TV; Digital TV (H.264); Digital Radio;
Data Broadcast
Type of service. Does not affect encoding.
Source ID 0 to 65535 Source ID
Hidden Yes; No
Hide Guide Yes; No
Error Monitoring (Not supported in this release)
Continuity Count Error
Threshold
Sets Thresholds for error monitoring of service from IP input
only.
Not supported in this release
Continuity Count Error
Sampling Window
Maximum Valid PID
Missing Period
To Next Page
Loading...