Hardware Control and Troubleshooting
Table 41 Output Fields for the show hardware Command with the detail Keyword
Field Description
POD Status Status of the power-on diagnostics (POD) tests:
• Success—Unit passed all POD tests.
• Failure—Unit failed one or more POD tests.
Port n—Port number if hardware data is port specific; not displayed if not applicable for this card.
Ports Entitled List of ports that are entitled on this line card:
• n1, n2, n3,...—Entitled ports.
• All—All physical ports on the line card are entitled.
Power Supply A1 Status
Power Supply A2 Status
Power Supply B1 Status
Power Supply B2 Status
Status of the power supply modules:
• No Power—Power has failed, is disconnected, or is not installed.
• Normal—Power is being supplied by this power supply.
RedbackApproved State of transceiver testing for this SFP optical transceiver in SmartEdge routers:
• No—Not tested.
• Yes—Tested.
RxPwrMin[dbm]
(2)
RxPwrMax[dbm]
-nn.nn—Receiver sensitivity (minimum) and overload level (maximum) for the version of the
SFP transceiver installed in this port.
S3Fpga rev S3 FPGA revision and file revision; applicable to XCRP only. This FPGA manages the control
and phase alignment of the Stratum-3 PLL.
SAR Image Type ATM mode currently loaded on the applicable ATM OC line cards:
(3)
• atm priority—ATM priority mode.
• ip-priority—IP priority mode.
• vc-fair—Virtual circuit (VC) fairness mode.
• hsvc-fair—Hierarchical shaping virtual circuit (HSVC) fairness mode.
SAR Image Version n.n.n.n—Version of the image.
SARC memory nnn MB—Size of segmentation and reassembly controller (SARC) memory; applicable to ATM
line cards only.
SARC status Status of the segmentation and reassembly controller (SARC):
• OK—SARC is ready.
• Not Ready—SARC is not ready.
• Unknown—Unable to read SARC status.
SCC id ID for the system communication controller (SCC) ASIC on a controller card; the SCC controls and
communicates with the line cards.
Serial No nnnnnnnnnnnnnn—Unique identifier for this unit; 14 alphanumeric characters.
5927/153 30-CRA 119 1170/1 Uen A | 2010-04-09