Escea DS1150 - D7 Gas Isolating Valve

D
26
630791 DS MKII INSTALLATION MANUAL
D7 
As per AS/NZS 5601 it is recommended that a gas isolang valve be installed prior to the inlet of the re for
servicing in the future.
It is recommended to install a gas isolang valve as close to the appliance as possible when installing your Escea
gas product. Fix it in a convenient posion to allow it to be closed easily during operaon. Consider access once
wall linings have been xed. In some instances, a gas isolaon valve will not be able to be ed due to physical
limitaons and access points. In such a situaon it is acceptable to place a valve closer to the gas meter or use
the gas meter as the isolang valve during service work and install.
END OF SECTION D
BY THE END OF THIS SECTION, YOU SHOULD HAVE:
 

 
