Escea DS1150 - F2 Log Fuelbed Installation

F
36
630791 DS MKII INSTALLATION MANUAL
F2 
Logs must be located correctly as stated/depicted in this secon.
The nal layout should replicate the last picture shown in each fuelbed size. Place the embers or akes in a
single even layer aer the logs have been located correctly (excess embers or akes should NOT be added if one
even layer has been achieved). The embers or akes must not cover the pilot or pilot guard. If ignion to the
main burner is unsasfactory please move embers away from the pilot cross lighng ports
Note: Improper posioning of any fuelbed media may create carbon build-up and will alter the unit’s
performance. Malfuncons due to improper fuel media placement will not be covered under warranty.
Log Index
KS1150 Series Logs
1
1
2
2
3
2
4
2
5
2
6
0
7
2
Use the index above as a guide for selecng the correct logs.
Log Setup DS1150
Step 1
Step 2
Step 3