eSolutions eProWallbox - External Accessories Configuration; PowerMeter (DPM) Configuration

27
User Manual
7 EXTERNAL ACCESSORIES CONFIGURATION
The external accessories compatible with eProWallbox are:
• PowerMeter (DPM): is an energy meter that enables the Dynamic Power
Management(DPM),asmartfunctionwhichallowsyoutorechargethe
electric vehicle using only the power available at home, modulating the
charging power and avoiding unpleasant blackouts.
• MIDcounter:isacertiedenergymeterthatallowsyoutomonitorthe
consumption of eProWallbox during each charging session.
7.1 PowerMeter (DPM)
PowerMeter (DPM) is an external meter that enables the Dynamic Power
Management(DPM)functionality,anditisconguredduringtheinstallationphase.
DPMissmartfunctionalitythatallowsyoutorechargetheelectricvehicleusing
only the power available at home, modulating the charging power, and avoiding
unpleasant blackouts. If you are using other appliances during the charging session,
the system can modulate the charging power towards the car, even suspending
temporarily the charging session. As soon as the other domestic appliances are
switchedo,thesessionwillresume.
It is also possible to change the maximum contractual power through the
eSolutions Charging
app,followingthestepsbelow:
• SelectthewallboxconnectedtothePowerMeter.
• Click on the blue wheel in the top right corner to go to Settings.
• Click on “Home Power”.
• Set your Contractual Power value in kW as indicated in your electricity
contract by moving the slider. This limit will not be exceeded by eProWallbox
WARNING
Do not install any accessory autonomously. Contact qualied
professionals who will perform the installation according to the
manufacturer’s instructions.