eSolutions eProWallbox - Wi-Fi Network Setup Guide; RFID Card Management and Authentication

18
User Manual
5.2.1 Wi-Fi setting
It is possible to connect eProWallbox to a Wi-Fi network via the eSolutions
Charging
app,followingthesesteps:
• Connect your smartphone to the same Wi-Fi network to which you want
to connect eProWallbox.
• Click on “Charge at home” in the top left menu.
• Select the eProWallboxyou’dliketocongure.
• Click on the blue wheel on the top right corner of the selected eProwallbox.
• Click on “Congure using Bluetooth”.
• Click on “Set Wi-Fi” and enter the Wi-Fi password.
5.3 RFID card management and authentication
the eSolutions Charging app enables RFID card management. Depending on the
connection (Standalone operating mode or not) it is possible to associate RFID
cardsindierentways.
NOTE
One RFID card is provided with eProWallbox.
Once eProWallbox
isassociatedwiththeUserproleandconnected, follow these
steps in the eSolutions Charging app to associate the RFID to your prole:
• Click “RFID management” in the top left menu
• Click on the plus sign (+) to add an RFID card
• Scan the QR code on the back of the RFID card
• It is also possible to add manually the RFID’s number located on the back
of the card
• In the dedicated section it is possible to activate, suspend, or delete RFID
cardsassociatedwiththeUserprole
NOTICE
During Wi-Fi setup, eSolutions Charging automatically detects the
same Wi-Fi network as the smartphone. Please insert the correct
password.