20
User Manual
5.4 eProWallbox display screens
WELCOME
LOADING
READY TO PLUG IN
VALIDATION SUCCESSFUL
AUTHORIZE WITH THE APP
OR THE RFID CARD
VALIDATION FAILED,
TRY AGAIN
This is the default screen in Autostart mode. It instructs the
operator to insert the charging cable, to start the charging session.
It also appears after a successful authentication
Thisscreenpromptsyouto:
• Wait for the authentication process to end
• Wait until after the charging cable has been plugged in
Invalid authentication via RFID card or via App.
Welcome message
This screen will appear only if the Authentication operating mode
is enabled.
To start the charging process, you need to authenticate via RFID
card or App.
Valid authentication via RFID card or via App
To Next Page
Loading...
