Essilor Pro-E 700 edger User Manual

The blue part of the wheel must be oriented towards the outside of the module, and the gray part
must be placed against the spindle.
Put the screw back on, insert the key and tighten the wheel (towards the back of the trough) with the
Allen key.
Remove the blocking key and the Allen key.
The new wheel is in place.
>
6
7
USER MANUAL> V. MAINTENANCE & SERVICING
167
Pro-E 600_Pro-E 700 > v1 -10.18

Essilor Pro-E 700 edger Specifications

General

Brand	Essilor
Model	Pro-E 700 edger
Category	Laboratory Equipment
Language	English