Essilor Pro-E 700 edger User Manual

Raise the stylus to validate the modification.
An audible signal sounds 3 times.
The segment becomes blue (only the points of reference set by you will appear), the machine
recalculates the trajectory of the curve => the trajectory becomes green.
The modification is validated.
The modification is validated.
The tracking distance for the front surface of the step bevel is managed in the customized
settings screen for the step bevel in “front surface tracking” mode.
>
>
>
6
USER MANUAL> II. EDGING A LENS
93
Pro-E 600_Pro-E 700 > v1 -10.18

Essilor Pro-E 700 edger Specifications

General

Brand	Essilor
Model	Pro-E 700 edger
Category	Laboratory Equipment
Language	English