Evil Mad Scientist AxiDraw V3 - Loading and Executing a Sample Plot

22
4.7 Open a document and print it
Download the set of AxiDraw example files from http://axidraw.com/ex
The download is a small zip archive of example files. Open (unzip) the archive.
Then, within Inkscape, open up the file called AxiDraw_First.svg. Once open, the
document should look approximately like this:
If you cannot see the full page outline when you first open the file, select from
the menu View > Zoom > Page, or type the number ‘5’ on your keyboard.
Finally, open AxiDraw Control, switch to the Plot (first) tab of AxiDraw Control,
and click Apply to begin the plot.