Evil Mad Scientist AxiDraw V3 User Manual

12
2.3 Unboxing AxiDraw
The pen-lift motor cable and the pen clip are disconnected for shipping.
Your first two steps, out of the box, are to re-attach these parts.
Locate the disconnected cable end
on the left hand side of the base.
The cable has three wires: Black, red, and white.
Plug its connector into the bottom three pins on the EBB Control Board
as shown. The black wire faces back, towards the edge of the board.

Evil Mad Scientist AxiDraw V3 Specifications

General

Brand	Evil Mad Scientist
Model	AxiDraw V3
Category	Toy
Language	English