Excel KP-200 - Page 10

4
KP-200 Oiling point/method/period
ITEM
REPLENISHING POINT
OILING
PERIOD
OILING METHOD
1
Bearings inside the chin
Check
Everyday
Injecting lubrication oil by pushing injecting gun by 5
times, avoid spilling and clean it if any
2
Between main gear and
saw frame
Check
Everyday
Injecting lubrication oil by pushing injecting gun by 7
times, avoid spilling and clean it if any
3
Saw frame
Check
Everyday
Injecting lubrication oil by pushing injecting gun by 5
times, avoid spilling and clean it if any
4
Oil tank
Check Every
week
Injecting by hydraulic oil below maximum level to avoid
spilling
5
Cooling oil tank
Check Every
week
Pouring cutting oil into the cooling oil tank, below
maximum level to avoid spilling