Excel KP-200 - Chapter 10. Maintenance Table, Daily, Weekly, Monthly, Quarterly, and Biyearly; Daily Check; Weekly Check; Monthly Check

51
Chapter 10. Maintenance Table, daily, weekly, monthly, quarterly, and biyearly
10-1. Daily Check
10-2. Weekly Check
10-3. Monthly Check
10-4. Quarterly Check
ITEM
Checked Section
Key Point
1
Blade tension
Adjust to proper tension of blade (refer to manual)
2
Oil tank
Replenish MOBIL DTE Light 32# hydraulic oil properly
3
Level of cutting liquid
Avoid insufficient level (may affect sawing)
Avoid successive level (may cause slipping and falling)
4
Platform
Keep away from dust and dirt
5
Saw blade
Avoid using damaged teeth, or wrong orientation, see manual for instruction
ITEM
Checked Section
Key Point
1
Gap between platform
and vice jaw
Adjust the gap properly, if exceeding 0.2mm, it may be too hard to move
2
Lubrication of chin
head
Replenish the lubrication oil properly
3
Prompt switch
Keep away from dust or dirt
4
Cylinder
Keep spring away from dust or dirt
ITEM
Checked Section
Key Point
1
Clean body
1. Clean the platform, and vice jaw
2. Clean the control panel
3. Clean the prompt switch
4. Mislaneous sections
2
Screw of vice jaw
Proper oil lubrication
3
Starter
Main motor, hydraulic motor, pumper, filter
ITEM
Checked Section
Key Point
1
Hydraulic oil
Quality, contamination, leaking of hydraulic oil
2
Hose connection
Loose or leaking conditions of connectors
3
Switch, button
Normal functions of switch, button
4
Chin head, saw frame,
slider
1. Gaps between parts
2. Noise
3. Gears engaged situation