Excel KP-200 - Sawing Speed (Stroke;Min); Sawing Pressure

25
SAFETY SWITCH ON: a. When turning right to 90 degree, the machine is powered.
b. When turning to ON, the manual must be read carefully.
c. When turning to ON, the electric box cannot be opened.
7. EMERGENCY: a. This is for emergency button, when pressed, the power supply will be completely
shut off.
b. This button is used under urgent condition.
c. Press this button after work completion to ensure safety.
5-2. Sawing Speed (Stroke/min)
The sawing speed is determined by the diameter, material feature of sawed object, and teeth number of
saw blade, a common reference of S45C, scale: stroke/min
5-3. Sawing Pressure
Normally the sawing pressure is determined by the material, diameter of sawed objects, and teeth number
of saw blade, but the dull extent of blade is not included in the following table.
MATERIAL
THICKNESS(mm)
PITCH/IN
PRESSURE
CARBON STEEL
UP TO 100
OVER 100
6
4
3
2
TOOL STEEL
UP TO 100
OVER 100
6
4
2
1
STAINLESS STEEL
UP TO 100
OVER 100
6
4
2
1
STRUCTURALS STEEL
UP TO 100
OVER 100
8-10
6
3
2
NI-CR-MO STEEL
UP TO 100
OVER 100
6
4
2
1
NON-FERROUS METALS
UP TO 100
OVER 100
6
4
5
3
ITEM
Stroke/min
Diameter
Speed selection
1
120
<100
140
2
140
100 - 200
120
Big wheel
V Belt
Motor wheel