Excell PH3 - Page 18

02006100 ZSME300000379
17
EXCELL PRECISION CO., LTD.
(2) Put the sample on the platter, press “ENTER” key. The screen displays “------”.
After the weight is stable, the sampling is finished.
3. Set the Range Value
(1) Press “RANGE” key，the screen displays the previous setting.
(2) Use “0” ~ “9” keys to input the target value. After keying one digit, the cursor
will move to right. Press “ENTER” key when finishing.
4. Put a container on the platter, the screen displays the container’s weight.
5. Press TARE key, the screen displays “------”. The “Net” icon is on, after the weight
returns to zero.
kg
.
kg
.
kg
.
kg
kg
Net
.
kg
2 kg
The weight of container is 2 kg.
20 kg
The previous setting is 20 kg.
The previous setting is 2 kg.
to