Excillum MetalJet D2+ - Page 11

METALJET D2+ INTRODUCTION
Revision 19, November 2016 Page 1-4
The main components of the pump box are the following parts (see Figure 1-2):
1. High-pressure tubing
2. Upper cooling block
3. Jet brake
4. Flex-hose assembly
5. Fore-vacuum hose
6. Cooling water inlet
7. Cooling water outlet
8. Pulsation dampener
9. Diaphragm guard
10. Jet pump
11. Outlet check valve
12. Pump head
13. Inlet check valve
14. Liquid-metal filling valve
15. Filling valve adapter
16. Lower cooling block
17. Roughing pump
18. Heater fan
19. Pump box electronics