METALJET D2+ INTRODUCTION
Revision 19, November 2016 Page 1-1
1 INTRODUCTION
1.1 Validity
This operating manual is for customers of Excillum. It describes the functioning of the MetalJet D2+ source and
provides the most important information for safe use of the unit. The description follows applicable EU
guidelines. Up-to-date operating instructions may be obtained by contacting Excillum, see page ii for contact
information.
1.2 Instructions and conventions
The safety instructions in this operating manual are the result of a risk assessment in accordance with SS EN
12100:2010 (Safety of Machinery - General principles for design - Risk assessment and risk reduction) formerly
SS-EN ISO 14121 (Safety of Machinery – Risk Assessment)).
In this document, the following hazard levels and information are considered:
Command or note: Command to perform an action or information about properties. If ignored, this may
result in damage to the product.
To Next Page
Loading...