METALJET D2+
Revision 19, November 2016 ii
Disclaimer
The information provided herein is supplied under a non-exclusive license authorizing its use solely for and in
conjunction with Excillum Aktiebolag’s (Excillum) products. Although diligent care has been used to ensure that
the information is accurate, nothing contained herein can be construed to imply any representation or warranty
as to the accuracy or completeness of this information. Excillum reserves the right to alter this information at
our own discretion at anytime. The warranty and product documentation remains valid as long as the customer
does not make any changes to the product.
Acknowledgement
All registered and unregistered trademarks, domain names and copyrights herein are the property of their
respective owners.
Excillum, MetalJet, MetalJet D1, MetalJet D2 and MetalJet D2+ are registered trademarks or trademarks of
Excillum AB. Excillum
’
s MetalJet sources are protected by several patents including, but not limited to, US
Patents No. US 6 711 233, US8 170 179, US 8 681 943, US 8 837 679, US 9 171 693, US 9 245 707, and Chinese
Patents No. CN 01 816396.3, ZL200780026317.0, ZL200980155094.7, ZL 200980158566.4, ZL 201080070417.5,
and other corresponding national patents and patent applications pending.
Copyright notice
© Excillum Aktiebolag 2016, Stockholm, Sweden. All rights reserved worldwide.
Contact information
The MetalJet D2+ source described in this operating manual has been produced by Excillum Aktiebolag. Excillum
may be contacted in several different ways.
Mailing and visiting address
Excillum Aktiebolag
Torshamnsgatan 35
SE-164 40 Kista
SWEDEN
Phone
+46 (0)8-750 96 60
Fax
+46 (0)8-750 96 65
E-mail
info@excillum.com
support@excillum.com
Website
www.excillum.com
To Next Page
Loading...