FAAC A952 - Weight and Width Limits

A952 9 532310 - Rev.A
50
100
150
200
250
300
350
400
450
500
700 800 900 1000 1100 1200 1300 1400 1500
1600
0-250
W
Max:115°-125°
kg
2.10 WEIGHT AND WIDTH LIMITS
The maximum weight of the leaf according to its width
is shown in the graphs below. All the points on the
curve and all the points below the curve are valid
weight and length combinations. Points above the
curve correspond to weight and length combinations
that cannot be automated using the A952.
The maximum opening angle or range of opening
angles are indicated in each graph by the symbol
W.
In the graphs relating to the shoe arm, the curve is
divided into two sections, which correspond to the
use of the short arm and the long arm
The maximum depth allowed between the surface
of the door and the architrave is also shown for each
application. The configuration parameter (
9
t) to be
set in basic programming is shown in brackets.
ARCHITRAVE MOUNTED
■ ARTICULATED ARM (
9
t=3)
mm
max. leaf weight according to the width (max. 130 kgm)