A952 82 532310 - Rev.A
15. UPLOAD / DOWNLOAD
There is a USB port on the E952CL board which can be
used to carry out the following operations:
- Load data from a USB pen drive (UPLOAD)
- Save data to a USB pen drive (DOWNLOAD)
FAAC provides updated firmware in a package called
ZIPACK, which contains the files in versions that are
compatible with one another. In order to be used,
the files must be saved to the root directory of a USB
storage device (not in a folder or zip file and without
the original names being changed).
L
Use a USB memory device formatted with the FAT or
FAT 32 file system. The NTFS format is not recognised
by the board.
AUTOUPDATE
1. Turn the power off, insert the USB storage device
into the USB port on the E952CL board and then
switch on the A952.
2.
-- and then bo will appear on the display: the
files that are needed to update the firmware of
the board and all the connected accessories are
loaded automatically from the USB storage device.
- While the firmware is being updated,
-- appears
on the display and the green LED flashes. When
finished,
bo reappears on the display. The display
then switches to the FW version and then to the
door status display.
- When finished, remove the USB storage device.
UPLOAD/DOWNLOAD MENU
1. Turn the power off, insert the USB storage device
into the USB port on the E952CL board and then
switch on the A952.
2. When
bo appears on the display, press and release
the
ll button to scroll through the Upload / Down-
load Menu options (see relative table).
Upload Operations
Press and hold
pp and qq simultaneously for at least 3
s in order to carry out the procedure on the display.
- the upload starts:
-- flashes on the display. Re-
lease the buttons.
- The procedure is complete when
Y appears on
the display.
If there are errors
no appears on the display and the red
ERR led is lit. Refer to the Diagnostics Section.
- Press
ll to return to the menu.
When finished, remove the USB storage device.
Download Operations
Press and hold down the
pp and qq buttons simultane-
ously for at least 3 seconds in order to run the function
displayed, until
Or appears on the display.
Release the buttons and use the
pp or qq buttons to
select the method for saving the file to the root of
the USB storage device:
Or (overwrite) or Ad (add).
Press
ll to confirm.
- The procedure is complete when
Y appears on
the display.
If there are errors
no appears on the display and the
red LED of the E952CL board is lit. Refer to the Diag-
nostics Section.
- Press
ll to return to the menu.
When finished, remove the USB storage device.
8 UPLOAD functions from USB
UP
Update the E952CL board firmware
File required: E952_xx.HEX
UE
KP EVO firmware update, including menu translations
File required: KP_xx.HEX and KPL_xx.BIN
UC
Upload the A952 configuration
File required: E952.PRG
Ut
Upload the TIMER configuration
File required: E952.TMR
NOTE: "xx" indicates the firmware version.
9 DOWNLOAD functions from USB
dC
Download the A952 configuration
File written: E952.PRG
dt
Download the TIMER configuration
File written: E952.TMR
To Next Page
Loading...
