Fagor MCS Series - Page 42

MCS- 42/92 Digital Brushless AC servo drive system - Ref.0707
Codes of the sales reference of Fagor cables
CABLE ENCODER - DRIVE
Example: IECD - 20
CABLE OF INCREMENTAL ENCODER
LENGTH (m) 5, 10, 15, 20, 25
(HD,
Sub-D,
M26)
Orange
Black
Green
Brown
Grey
Red
Blue
Brown - Red
Ready Made Cable
EEC-SP 5/10/15/20/25/30/35/40/45/50
(Length in meters; including connectors)
10
2
6
5
1
8
3
4
12
REFCOS
SIN
REFSIN
+485
-485
GND
TEMP/KTY84 (-)
TEMP/KTY84 (+)
+8V
COS
7
20
19
11
2
10
1
21
22
26
25
23
Yellow
Brown - Blue
9
Cable 3x2x0.14+2x0.14+2x0.5
Signal Pin Pin
CHASSIS
E0C 12
1
2
3
4
11
1012
7
8
6
5
9
Front View
Front View
[ 0.5 mm
2
]
[ 0.5 mm
2
]
TO DRIVE
TO MOTOR
Shielded by pairs of cables, and overall shield.
All the shields of the twisted pairs must be connected to each other
and to the common pin of Chassis (only at the drive end).
The overall shield is connected to both connector housings
The 26-pin connector housing must be conductive (metallic).
19
26
1
9
TYPE I
(HD,
Sub-D,
M26)
Blue
Black
Green
Brown
Grey
Purple
White
Red
Ready Made Cable
EEC-SP 5/10/15/20/25/30/35/40/45/50
[ Length in meters; including connectors ]
10
2
6
5
1
8
3
4
12
REFCOS
SIN
REFSIN
+485
-485
GND
+8V
COS
7
20
19
11
2
10
1
21
22
26
25
23
Yellow
Black
9
Cable 3x2x0.14 +4x0.14+2x0.5
Signal Pin Pin
CHASSIS
E0C 12
1
2
3
4
11
1012
7
8
6
5
9
Front View
Front View
TO DRIVE
TO MOTOR
[ 0.5 mm
2
]
Shielded by pairs of cables, and overall shield.
All the shields of the twisted pairs must be connected to each other
and to the common pin of Chassis (only at the drive end).
The overall shield is connected to both connector housings
The 26-pin connector housing must be conductive (metallic).
[ 0.5 mm
2
]
19
26
1
9
TEMP or KTY84 (-)
TEMP or KTY84 (+)
TYPE II
SUB-D
HD M26
IOC-17