Digital Brushless AC servo drive system - Ref.0707 MCS- 49/92
WinDDSSetup
Fagor application for PC. Establish communication between the MCS unit and the PC
via serial port. The operator can use the application's interface to read, modify, save to
a PC file and download from a PC file all the parameters and variables of the drive and
check the status of the motor-drive combination; thus making the final adjustment of the
servo drive system easier, faster and more comfortable. This also makes it easier to
manufacture many machines that have MCS units.
Warning. Only MCS units whose software version is 2.04 or greater can communicate
with the WinDDSSetup installed on the PC. The version of the WinDDSSetup
application must be 06.08 or greater.
To Next Page
Loading...
Need help?
General
