Fagor MCS Series - Page 77

Digital Brushless AC servo drive system - Ref.0707 MCS- 77/92
Function: Velocity feedback.
Valid values: - 9999, ..., + 9999 rev/min.
Function: Velocity command after applying limits, ramps, etc.
Valid values: - 9999, ..., + 9999 rev/min.
Function: Final velocity command applied to the loop.
Valid values: - 9999, ..., + 9999 rev/min.
Function: Digital velocity command.
Valid values: - 6000, ..., 6000 rev/min.
SV2 BASIC, RO VelocityFeedback
SV6 BASIC, RO VelocityCommandAfterFilters
SV7 BASIC, RO VelocityCommandFinal
SV15 USER, RW DigitalVelocityCommand