FATEK P5070S - Page 141

141
Signal Level
Ethernet
Internet Protocol
192.168.0.2
Port
502
PLC Station No.
0
Communication Method
MODBUS TCP(Zero-based)
2.6.2.2 Memory Resource Review
Device
Description
Data
bit
Input
format
Min.
Max.
%M
Memory bit
1
DDDDD
0
65535
%MW
Memory word
16
DDDDD
0
65535
2.6.2.3 Connecting to HMI
Configuring IP Address on PLC
Use TwidoSuite to configure the IP of the PLC.
Expand Describe tab, and click Ethernet Port,
The IP address and other parameters can be set.
Note: For more detailed information please refer to the PLC manual.
Connect PLC to HMI